The course combines good overall operational practices with specifics of the Mk-V control system. The Mk-V portion of the course is adjusted to specifically deal with level required by Operations personnel. To operate a machine safely and for the long-term, we need to have a good understanding of the basic theory, we need to know how different components might be placed at risk, we need to understand how the Mk-V control system “thinks”, how the Mk-V system files are utilized to an operators’ advantage, we need to know how and when the protective systems should react, and we need to know the importance of proper operation of the auxiliary systems. With respect to the protective systems, we need to understand the symptoms of some of the common problems, what actions the operator should (or should not) take, what actions protective systems should take, and when. This course discusses all of this in a generic fashion (that is not necessarily specific to any given machine). A good big-picture is required to become a “skilled operator” and this course takes us down that path.
A topical outline
includes: Review of Gas Turbine Theory, Review of Gas Turbine Construction & Operating Principles, Introduction to Mk-V Hardware, Documentation, How to Read Logic Diagrams, Alarm Drops, Auxiliary Systems, Start Up Sequencing, Speed Control, Temperature Control, NOx, Servo Valve Drive Systems, Overspeed / Over Temperature, Protective Circuits, Abnormal Conditions and Response.
Course Dates / Location / Fee
for detail on the course dates / locations / and registration fees.
HPC’s 3-4-2 policy applies: Sign up 3 for the same course/date, pay in advance, and pay for only 2 (the 3rd
participant is free)!
HPC Technical Services reserves the right to cancel any course/seminar within 10-working days of the scheduled date. Fees are 100% refunded or credited to another Seminar (clients' choice) if HPC should cancel any Seminar. HPC is not responsible for non-refundable airline tickets or other travel expenses under any circumstance.
What you will receive
- 1 copy of HPC Technical Services' textbook, Gas Turbine Mk-V for Operators, as written by Harold Parker. It is a valuable desktop reference in addition to being able to enhance the learning process.
- A Certificate of Completion with 31 PDH.
Gas Turbine Operator Certification
Those who attend this course are automatically qualified to take HPC Technical Services' Certification Examination. This examination is offered at no additional expense to the participant. An 80% passing grade is required. The examination length will not exceed 2-hours. Those who complete this examination will receive a revised "certificate of completion" that recognizes this accomplishment along with two-copies of a "To Whom It May Concern" letter that states their accomplishment. (Two copies are provided, one for the participants' employer and one for the participants' personal file.) Consult HPC's website, www.TurbineGeneratorTraining.com
, for detail on this certification program.
All HPC instructors are educated ‘experts’ on the subjects they teach, with years of relevant hands-on experience (typically 20+ years), and have proven instructional skills. Brief resumes can be looked up on HPC’s website, www.TurbineGeneratorTraining.com
Upon completion of this course, the participant will be able to:
- Describe the relationship of the various turbine components and how they may be at risk during operations.
- Describe the different fuel systems used in gas turbine operations.
- Identify and describe the purpose of major hardware devices found in the Mk-V system.
- Demonstrate the ability to use that Mk-V Documentation that is pertinent to the operator.
- Demonstrate the ability to navigate the print/file system to trace an alarm drop to the device initiating that alarm.
- For each of the gas turbine auxiliary systems (cooling & sealing air, lube oil systems, fuel forwarding, control and hydraulic oil) describe the systems' purpose, normal operations, and abnormal conditions.
- Given a gas turbine control system block diagram, sequence the turbine through a start up, load changes, shutdown, and emergency conditions.
- Demonstrate the ability to navigate the control sequence program sufficiently to trace an alarm drop to the initiating algroithym.
- Given an alarm, describe how the unit may be at risk.
- Given an alarm, describe what are the most proper actions to take.
- Review of Gas Turbine Theory
- Review of Gas Turbine Construction & Operating Principles: Air Inlet Guide Vane & Casing, Compressor Stator, Compressor Rotor, Combustion Section, Turbine Stator, Turbine Rotor, Exhaust Section, Bearings
- Mk-V Hardware: Primary Operating Interface, BOI, Control Panel Configurations, Overview of Networks
- Mk-V Documentation: Control Specs, Internal Power, Control Sequence Program (CSP), Inputs/Outputs,
- Understanding the CSP: Signal Names, Logic, And/Or, Math Functions, Comparators
- Tracing an Alarm Drop: Alarm Drop Number, CSP Cross Reference, CSP, Field Device
- Auxiliary Systems, Schematic Piping Diagrams, Device Summary, Lube Oil and Hydraulic Supply, Trip Oil and Control Oil, Cooling and Sealing Air, Cooling Water
- Start Up Sequencing: Overview, CSP Block Diagram, Alarms
- Speed Control: Overview, CSP Block Diagram, Alarms
- Temperature Control: Overview, CSP Block Diagram, Alarms, Combustion Monitor
- NOx: Overview, CSP Block Diagram, Alarms
- Control Valve Positioning: Servo Mechanisms, Gas Control Valve, Liquid Control Valve, Fuel Splitter, and DLN Splitter; Function, CSP Block Diagram, Alarms
- Protective Systems: L4, Overspeed Trip, Emergency Overspeed Trip, Overtemperature Trip, Vibration, 20FG/20FL
- Abnormal Conditions and Response: Review of Alarm Functions and Discussion of Miscellaneous Alarms (those not covered in materials above)
- Certification Examination for those who are interested
Frequently Asked Questions
- Will HPC Technical Services bring this course to our location for our personnel only? Can HPC customize the material? YES, call or email Stephen Parker, Stephen@TurbineGeneratorTraining.com for a price quotation.
- Is HPC Technical Services' textbook available for purchase as a reference document? Yes. $189 + S&H.
- Can HPC Technical Services provide "Technical Assistance" in conducting functional checkouts or troubleshooting problems? Yes we can. Call or contact Stephen Parker, Stephen@TurbineGeneratorTraining.com for our rate sheets and any further information required.