CT513 – (GE) Mk-I Gas Turbine Controls

CT513 – (GE) Mk-I Gas Turbine Controls

5 days - 35 PDH Credits Awarded

$3,495.00

No future dates scheduled

Description

Learn the operations, maintenance and troubleshooting techniques on this control system in a classroom environment as opposed to 2pm Friday afternoon when the demand is high and the unit won't start.  Learn how to use all the OEM drawings that are provided with the machine, how to read the drawings, how to find information, how the various systems interact.  Learn how the Mk-I electronic control signals are developed, and how they result in positioning of the fuel control valve(s).  Learn how the control system responds to plant / system deviations to control load output.  Learn why and how temperature control circuits function to provide protection of gas turbine components.  Especially, the participant will learn outage preventive maintenance procedures that should be considered and how to troubleshoot problems. Topical outline includes:  Review of Gas Turbine Theory, Equipment Overview, Auxiliary Systems, Electric Fundamentals as they apply to Mk-I Gas Turbine Controls, Control Elementary Aids, Control Panel Arrangement, Test Equipment, Power Supplies, Control Principles, Control Sequences, Start-Up, Speed Control, Temperature Control, Servo Valve Drive Systems, Protection Systems, Calibration and Troubleshooting. This course is intended for E/I Technicians, Engineers and Operators.

Objectives

Upon completion of the course the participant will be better able to maintain and troubleshoot the (GE) Mk-I Gas Turbine Control System, specifically the participant will be able to:
  1. Demonstrate the ability to use the GE Mk-I drawings/schematics normally available on the job-site.
  2. Describe the print and identification numbering system used throughout the turbine control system.
  3. Demonstrate the ability to trace out the electrical signals throughout the control system.
  4. Describe the basic theory used with summing devices.
  5. Describe the hydraulic servomechanisms.
  6. Given a normal change in operating conditions, describe the proper response of the control system and the response of the individual components.
  7. Demonstrate adequate knowledge about using the appropriate calibration procedures.
  8. Demonstrate adequate knowledge about applying troubleshooting sequences peculiar to this control system.
  9. Demonstrate the ability to communicate control problems in a more effective manner.

Course Dates / Location / Fee

See www.TurbineGeneratorTraining.com for detail on the course dates / locations / and registration fees. HPC’s 3-4-2 policy applies:  Sign up 3 for the same course/date and pay for only 2! HPC Technical Services reserves the right to cancel any course/seminar within 10-working days of the scheduled date.  Fees are 100% refunded or credited to another Seminar (clients' choice) if HPC should cancel any Seminar.  HPC is not responsible for non-refundable airline tickets or other travel expenses under any circumstance.

Instructors

All HPC instructors are educated ‘experts’ on the subjects they teach, with years of relevant hands-on experience (typically 20+ years), and have proven instructional skills. Brief resumes can be looked up on HPC’s website, www.TurbineGeneratorTraining.com.

Frequently Asked Questions

  • Will HPC Technical Services bring this course to our location for our personnel only? Will HPC customize the presentation to suit our particular needs?  YES, call or email Stephen Parker, Stephen@TurbineGeneratorTraining.com for a price quotation.
  • Is HPC Technical Services' textbook available for purchase as a reference document? This text is not yet available for purchase.
  • What is the cost for HPC Technical Service to deliver this course at our location? Well, of course that can vary, but generally speaking, if you're planning on having 6+ attend, when considering your T&L, it is to your advantage to perform the course at your plant (office).  You gain from the customization and price.
  • Can HPC Technical Services provide "Technical Assistance" in outage planning, implementation or troubleshooting? Yes we can.  Call or contact Stephen Parker, Stephen@TurbineGeneratorTraining.com for our rate sheets and any further information required.

Course Outline

Monday

  • Gas Turbine Theory: Simple Cycle Gas Turbines, Performance Curves
  • Equipment Overview: Air Inlet Section, Compressor Section, Combustion Section, Turbine Section, Exhaust Section
  • Auxiliary Systems, Schematic Piping Diagrams, Device Summary, Lube Oil and Hydraulic Supply, Trip Oil and Control Oil, Cooling and Sealing Air, Cooling Water

Tuesday

  • Electric Fundamentals as they apply to Mk-I Gas Turbine Controls
  • Turbine Control Elementary Aids
  • Control Panel Arrangement
  • Test Equipment
  • Power Supplies
  • Control Principles

Wednesday

  • Control Sequences Using Elementaries
  • Start Up Control: System Description, Drawings
  • Speed Control: System Description, Drawings

Thursday

  • Temperature Control: System Description, Drawings
  • Servo Valve Drive Systems: System Description, Drawings
  • Overspeed / Over Temperature

Friday

  • Protective Circuits: System Description, Drawings
  • Calibration Procedures: Control Specifications, Start Up Control, Speed Control, Temperature Control, and Fuel Control Mechanisms
  • Troubleshooting: Routine Problems, Case Discussions

What you will receive

  1. 1 copy of HPC Technical Services' textbook, (GE) Mk-I Gas Turbine Controls, a $195 value, as written by Harold Parker. It is a valuable desktop reference in addition to being able to enhance the learning process.  (This valuable text is available for purchase if you cannot attend – US$195).
  2. A Certificate of Completion with 35 PDH.

Gas Turbine I&C Certification

There are two levels of certification (Both levels require this course):
  1. Engineer
  2. I&C Technician
Those who attend this course are automatically qualified to take HPC Technical Services' Certification Examination.  This examination is offered at no additional expense to the participant.  An 80% passing grade is required.  The examination length will not exceed 2-hours.  Those who complete this examination will receive a revised "certificate of completion" that recognizes this accomplishment along with two-copies of a "To Whom It May Concern" letter that states their accomplishment.  (Two copies are provided, one for the participants' employer and one for the participants' personal file.) Consult HPC's website, www.TurbineGeneratorTraining.com, for detail on this certification program.